44
Getting Started
Adding optional external devices
4 Highlight Sleep, and then click or touch the Sleep option.
Sleep mode saves the current state of the computer to memory
so that, when you restart the computer, you can continue
working from where you left off.
Adding optional external devices
Before adding external devices, Toshiba recommends setting up your
software. See “Setting up your software” on page 41.
After starting your computer for the first time you may want to:
❖ Add more memory (see “Adding memory (optional)” on
page 44
❖ Connect external devices (see “Connecting an external device”
on page 66)
❖ Connect an external monitor (see “Using external display
devices” on page 66)
Adding memory (optional)
HINT: To purchase additional memory modules, see the
accessories information packaged with your system or visit
accessories.toshiba.com.
Your computer comes with enough memory to run most of today’s
popular applications. You may want to increase the computer’s
memory if you use complex software or process large amounts of
data.
Before adding external devices or memory, Toshiba recommends
setting up your software. See “Setting up your software” on page 41.
NOTE
NOTE
To Next Page
Loading...
