User’s Manual 7-1
HW Setup and Passwords
Chapter 7
HW Setup and Passwords
This chapter explains how to use TOSHIBA HW Setup program to
configure your computer, and provides information on settings for various
functions.
Accessing HW Setup
To run the HW Setup program, click Start All Programs TOSHIBA
Utilities HWSetup.
HW Setup Window
The HW Setup window contains a number of tabs (General, Password,
Display, Boot Priority, Keyboard, LAN and USB) to allow specific functions
of the computer to be configured. In addition there are also three buttons :
OK, Cancel and Apply.
General
This window displays the BIOS/EC version and contains two buttons:
Default and About.
Setup
This field displays the installed BIOS version, date and EC version.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.
Default Returns all HW Setup values to the factory
settings.
About Displays the HW Setup version.
To Next Page
Loading...
