file:///C|/Websites/Manuals/C655/manual_c655.htm[5/22/2013 1:21:31 AM]
Step#3
Now, remove the 4 screws as shown and rest the keyboard on its face or set it back toward the screen to gain access to
the connector which is locking the keyboard cable.
Step#4
This final step requires you to remove the keyboard cable from the motherboard. To remove the cable slide the clip on
the lockdown connector outward approximately 1/32 of an inch.
Your done! Reverse procedure to install your new keyboard.
To Next Page
Loading...
