User’s Manual 2-8
The Grand Tour
Indicators
This section explains indicator functions.
System indicators
LED system indicators next to their respective icons, glow when specific
computer operations are in progress.
System indicators
Touch Pad The Touch Pad located in the palm rest is used to
control the movement of the on-screen pointer.
For more information, please refer to the Using
the Touch Pad section in Chapter 4, Operating
Basics.
Touch Pad control
buttons
The control buttons located below the Touch Pad
allow you to select menu items or manipulate text
and graphics as designated by the on-screen
pointer.
DC IN/Battery The DC IN/Battery indicator shows the condition
of the DC IN and the battery's charge - green
indicates the battery is fully charged while the
power is being correctly supplied from the AC
power adaptor. Please refer to Chapter 6, Power
and Power-Up Modes for more information on
this feature.
Power The Power indicator normally glows green when
the computer is turned on. However, if you turn
the computer off into Sleep Mode, this indicator
will flash green - approximately two seconds on,
two seconds off - both while the system is
shutting down and while it remains turned off.
To Next Page
Loading...
