36
Removing
an ExpressGard@
Removing
an ExpresGad@
1 Prepare
the card
for removal
by clicking
the
Safely
Remove
Hardware
icon
in the
Notification
Area and then selecting the
card
or device
you
want
to remove.
If the system is unable to
prepare
the card for
safe removal, a
message
will tell
you
to try
again
later.
If the
card can
be
removed now, the
system displays
Safe to Remove Hardware.
2 Locate the
ExpressCard@
eject button.
3
Press the ExpressCard eject button once to
pop
it
out slightly,
and
push
it in
to
remove the ExpressCard.
The ExpressCard ejects slightly from the slot.
4
Grasp
the edges of
the ExpressCard and slide it out of the slot.
Learning the basics
Gomputing
tips
* Save
your
work
frequently.
Your work stays
in the computer's
temporary
memory until
you
save
it to the
internal storage drive.
If the network
you
are
using
goes
down and
you
must restart
your
computer to
reconnect, or
your
battery
runs out of charge while
you
are
working,
you
will
lose
all work
since
you
last
saved.
HINT:
Some
programs
have an automatic save
feature
that can be
activated.
This feature
saves
y0ur
file to the
internal
storage drive at
preset
intervals.
See
your
software
documentation
for details.
*
Back up
your
files to
disks
(or
other
removable media) on a
regular basis.
Label the backup
copies clearly and store
them in
a safe
place.
* Scan
all new
files for viruses.
.:.
Do
not turn off the
computer
if a drive
indicator light indicates
a drive
is active.
M
N
OT
E
The Windows@ operating
system
records information,
such as
your
desktop
setup, during
its
shutdown
procedure
lf
you
do
not let
the
Windows@
operating system shut
down
normally,
details such as
new
icon
positions
may
be
lost.
To Next Page
Loading...
