40
Using
the
optical
driue
tHHU
ffi {$SI
ll
trf,[ ffi$ffii{EEltE88!
$UffiffitH
6 Place
the
dis c
carefully in
the dis
c tray,label
side up.
(Sample
lllustration) Positioning
the disc
in the drive
7
Gently
press
the disc onto the center
spindle until it clicks into
place.
mHa1dleDVDsandCDscareIully,makingC0ntactonlywiththecenter
hole
and edge
Do not
touch the surface
of
the
disc
Do not
stack
discs.
lf
you
incorrectly handle
the discs,
y0u
could
lose
data
Make
sure the disc
is
completely on the
spindle and
is lying
flat
on the tray.
mlfyouinsertthediscincorrectly,itmayjamthedrive.lfthishappens,
contact
Toshiba
support
for
assistance.
9 Push the disc tray in by
pressing gently
on the center of the tray
until it clicks into
place.
You are ready
to
use the
disc.
Removing
a disc
with
the
Gomputer on
To remove
an
optical
disc with the computer turned
on:
L Press
the eject button on the drive.
mDonotpr9Sqtheejectbuttonwhilethein-useindicatorlightis
glowing.
D0ing
so c0uld
damage the disc
0r
the
drive,
Also, if
the
disc
is
still spinning
when
y0u
0pen the disc tray, wait for
it
to stop spinning
before
y0u
remove
it.
To Next Page
Loading...
