EasyManua.ls Logo

Toshiba Satellite L300D - ODD (Optical Disk Drive); Procedure 1 ODD Cleaning Check; Procedure 2 Test Program Check; Procedure 3 Connector Check and Replacement Check

Toshiba Satellite L300D
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2Troubleshooting 2.8ODDDrive
2-18 SatelliteL300D/L305D/SatelliteProL300D/EQUIUML300D/SATEGOL300DMaintenanceManual
2.8 ODD(OpticalDiskDrive)
TocheckiftheinternalODDdriveisdefectiveormalfunctioning,followthetroubleshooting
proceduresbelowasinstructed.
Procedure1ODDCleaningCheck
Procedure2TestProgramCheck
Procedure3ConnectorCheckandReplacementCheck
Procedure1ODDCleaningCheck
1. Turnoffthepowertothecomputer.
2. OpentheODDtraybyinsertingaslenderobjectsuchasastraightenedpaperclipinto
theejecthole.Theobjectmustbelongenoughtoactivatetheejectmechanism.
3. Cleanthelaserpickuplenswithalenscleaner.Applythecleanertoaclothandwipe
thelens.
4. IftheODDdrivestilldoesnotfunctionproperlyaftercleaning,gotoProcedure2.
Procedure2TestProgramCheck
ExecutetheODDdrivetestprogramavailableaspartofthemaintenancetestprogram.Insert
thediagnosticsCDinthecomputer'sCD,turnonthecomputerandrunthetest.Theninserta
testODD(Toshiba-EMIDVD-ROMTESTDISKTSD-1)intotheODDdrive.SeeChapter3
forinformationonhowtoperformthetest.
Ifanyerrorisdetectedbythetest,gotoProcedure3.
Procedure3ConnectorCheckandReplacementCheck
TheODDdriveisconnectedtothesystemboardbytheconnector.Theconnectormaybe
disconnectedfromthesystemboardorfaulty.Disassemblethecomputerfollowingthesteps
describedinChapter4andperformthefollowingchecks:
Check1 MakesurethefollowingconnectorhasbeenfirmlyconnectedtotheODD
driveandthesystemboard.
Iftheconnectorislooseoroff,reconnectitfirmlyandreturntoProcedure2.
Ifthereisstillanerror,performCheck2.
Check2 Theconnectormaybefaulty.Replacetheconnectorwithanewone
followingthestepsinChapter4.IftheODDdriveisstillnotfunctioning
properly,performCheck3.
ODD
Drive
Systemboard
CPU
Attachmentcase
Connector
Downloaded from LpManual.com Manuals

Table of Contents

Related product manuals