User’s Manual 6-10
Power and Power-up Modes
6. Slide and hold the battery release latch (1) to disengage the battery
pack and then remove it from the computer (2).
Figure 6-2 Releasing the battery pack (2)
To install a battery, follow the steps as detailed below:
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery safety
lock (2) is in its position.
Figure 6-3 Securing the battery pack
3. Turn your computer over.
2
11
2
1
Downloaded from LpManual.com Manuals
To Next Page
Loading...
