Chapter 4 Replacement Procedures
4.7 3G Module Card
Removing 3G module card
The following describes the procedure for removing a 3G module card (See Figure 4-7-1
to 4-7-2).
1. Remove screws of 3G module card.
M2x 5 BIND screw x2
2. Disconnect the 3G module antenna cable from the connectors on a 3G module card
3. Remove a 3G module card from the connector on the mother board.
Figure 4-7-1 3G module card
Satellite L640/L645, Satellite Pro L640/Pro L645 Maintenance Manual (960-Q08)
To Next Page
Loading...
