Chapter 4 Replacement Procedures
5. Remove the following screws securing the Top cover assembly from the front of
computer. Pull up and remove the Top cover assembly from the Base cover assembly.
M2.05.0 FLAT BIND screw Back x5
M2.0X3.0 FLAT BIND screw Back x2
Figure 4-9-2 Remove the screws (front) and Top cover assembly
6. Disconnect the touch pad cable/BT cable/Speaker cable/ power cable from the
connector on the mother board.
Figure 4-9-3 Disconnect the touch pad
cable/BT cable/speaker cable/power cable
Satellite L640/L645, Satellite Pro L640/Pro L645 Maintenance Manual (960-Q08)
4-34
To Next Page
Loading...
