User’s Manual 5-6
The Keyboard
Arrow Mode
To turn on Arrow Mode, press FN + F10 - you are able to access cursor
and page control functions by using the keys. You are able to press FN +
F10 again to turn off this overlay function.
Numeric Mode
To turn on Numeric Mode, press FN + F11 - you are able to access
numeric characters by using the keys. You are able to press FN + F11
again to turn off this overlay function.
Figure 5-2 The numeric keypad overlay
Temporarily using normal keyboard (overlay on)
While using the overlay, you can temporarily access the normal keyboard
functions without having to turn the overlay off:
1. Hold down FN key and press any other key - this key will operate as if
the overlay were off.
2. Type upper-case characters by holding down FN + SHIFT and pressing
a character key.
3. Release FN key to continue using the selected overlay function.
Temporarily using overlay (overlay off)
While using the normal keyboard function, you can temporarily use the
keypad overlay without having to turn it on:
1. Hold down FN key.
2. Release FN key to return to normal keyboard operation.
To Next Page
Loading...
