157
Utilities
TOSHIBA Hardware Setup
❖ Display—Allows you to change various default settings for the
built-in display
When the computer restarts, it remembers the last configuration. If
data does not appear on the display you are using after starting in
Sleep mode, press
Fn + F5. For more information, see “Directing the
display output when you turn on the computer” on page 82.
❖ General—Allows you to view the current BIOS version or
change certain settings back to their default values
❖ Keyboard—Allows you to access the wake-on keyboard
function
❖ LAN—Allows you to set networking functions
❖ Password—Allows you to set a user password
❖ USB—Allows you to enable or disable USB Legacy Emulation
To Next Page
Loading...
