STEP 22
Remove three screws securing the motherboard
and cooling fan assembly.
Disconnect the USB board cable (1) and power
button board cable (2). Use same technique as
for disconnecting the keyboard cable.
STEP 23
Carefully unglue the protective film from the
laptop case.
STEP 24
In order to remove the motherboard it's
necessary to disconect the DC jack cable and
both wireless card antennas.
They are located under the memory cover which
we removed in the step 2.
STEP 25
Start removing the motherboard as it shown on
the picture.
www.battery-adapter.com
www.battery-adapter.com
www.battery-adapter.com
To Next Page
Loading...
