STEP 26
Remove motherboard from the laptop base.
STEP 27
On the bottom side of the motherboard you can
access the cooling fan assembly and CMOS
battery (on the left side from the wireless card).
STEP 28
In order to remove the cooling fan assembly (fan
and heatsink) you'll have to loosen four screws
and disconnect the fan cable.
After that carefully lift up the assembly and
separate it from the processor.
STEP 29
The DC jack is attached to the harness.
If the DC jack failed, you can remove the whole
harness and replace it with a new DC jack
harness.
How to replace screen on Toshiba Satellite L755, L755D, L750, L750D
www.battery-adapter.com
www.battery-adapter.com
www.battery-adapter.com
To Next Page
Loading...
