STEP 30
There are four screw covers on the screen
bezel. One cover in each bezel corner.
STEP 31
Remove all four covers with a sharp object.
Glue covers (they have sticky tape on the
bottom) somewhere on the bezel so they don't
get lost during the disassembly process.
STEP 32
Start separating the screen bezel from the
display back cover.
Here's how I do it:
- insert your fingers between the bezel and LCD
screen on the top of the display assembly.
- insert the guitar pick (you can use any other
piece os plastic) between the bezel and back
cover and slowly move it along the side.
- at the same time wiggle the bezel to unlock
hidden latches inside the display.
STEP 33
Continue separating the screen bezel from the
display assembly.
www.battery-adapter.com
www.battery-adapter.com
www.battery-adapter.com
To Next Page
Loading...
