STEP 8
Carefully lift up the upper side of the keyboard and turn it
upside down on the palmrest.
STEP 9
Now you can access the keyboard cable connector.
In order to release the cable you'll have to unlock the
connector first.
In the following two steps I show how to unlock the connector
and release the cable.
STEP 10
The keyboard connector has a white retainer.
You'll have to lift up the left side of the retainer with your
fingernail. Do not apply much force. The retainer opens up at a
90 degree angle.
The retainer must remain attached to the connector base.
STEP 11
After the connector is unlocked you can pull the keyboard
cable.