2. Connect the DC output plug of the AC adaptor to the DC IN 19V jack
on your computer.
Figure 2-6 Connecting the DC output plug to the computer (S50-C)
Figure 2-7 Connecting the DC output plug to the computer (L50W-C)
1. DC IN 19V jack 2. DC output plug
Product appearance depends on the model you purchased.
3. Plug the power cord into a live wall outlet. The DC IN/Battery indicator
glows.
Turning on the power
This section describes how to turn on the power. The Power indicator
indicates the status. Refer to the Power Condition Descriptions section for
more information.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
1. Open the display panel.
2. Press the power button.
User's Manual
2-9
To Next Page
Loading...
