EasyManua.ls Logo

Toshiba Satellite SERIES - Connecting External Equipment

Toshiba Satellite SERIES
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
English
Connecting External Equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch remove the
mains plug from the wall socket.
ILLUSTRATION SHOWS 40L25**
*a decoder could be
Digital Satellite or any other
compatible decoder.*Model
will determine power cord
position.
media recorder
POWER CORD
HDMI 1 INPUT
SOCKET
SCART 1
(INPUT/TV OUT)
USB SOCKET
HDMI 2 INPUT
SOCKET
decoder*
Aerial cables: - - - - - - - - - - - - - - - - - - -
Connect the aerial to the ANT socket on the rear of the television.
If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the
television.
SCART cables: - - - -- - - - - - - - - - - - - - -
Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media player SAT
socket to the decoder MEDIA REC. socket.
Before running Auto Tuning put your decoder and media recorder to Standby.
HDMI
®


will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also support VGA, SVGA, XGA,
WXGA and SXGA.
NOTE: Although this television is able to connect to HDMI equipment it is possible that some equipment may
not operate correctly.
A wide variety of external equipment can be connected to the back of the television, therefore the
relevant owners manuals for all additional equipment must be referred to.
If the television automatically switches over to monitor external equipment, return to normal television by
pressing the desired channel button. To recall external equipment, press to select.
NOTE: Due to copy protected signal in some DTV programme, non-scrambled content and scrambled content
with “copy freely (CGMS-A: 00)” are available via SCART analogue video and audio output.
DTV Programme SCART Analog Output
Scrambled with CGMS-A: 00 (Copy Freely) Output via SCART
Scrambled with CGMS-A: 01 (Copy No More) Not output via SCART
Scrambled with CGMS-A: 10 (Copy Once) Not output via SCART
Scrambled with CGMS-A: 11 (Copy Never) Not output via SCART
Non- scrambled Output via SCART
*CGMS-A (Copy Generation Management System-Analog) is a copy protection mechanism for analog
television signals.

Table of Contents

Other manuals for Toshiba Satellite SERIES

Related product manuals