123
Exploring Your Computer’s Features
Setting up for communications
5.375 x 8.375 ver 2.3
1 Plug one end of a telephone cable (purchased separately) into
the modem port on the left side of the computer.
Sample connecting the telephone cable to the modem port
2 Connect the other end to the RJ-11 wall jack.
Sample connecting to a wall jack
The modem is designed for use with a standard analog
telephone line. Do not connect the modem to a digital
telephone line. A digital line will damage the modem.
Now you are ready to send a fax or use the modem to connect
to an online service or the Internet.
To Next Page
Loading...
