Toshiba SDP95S - Connecting to Audio Systems

63
Connections
Connecting to an audio system equipped with analog audio inputs
1
Connect an audio system equipment to
the AV OUT jack of this player.
Signal flow
To analog audio inputs
Audio system
AUDIO IN
R
L
Red (Right)
White (Left)
Yello w (Vi deo)
No need to connect.
To AV OUT
Audio/video cable
(supplied)
Audio/video cable
(not supplied)
Caution
• When you connect the player to other equipment, be sure to
turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• Turn off the amplifier before you connect or disconnect the
player’s AC adapter. If you leave the amplifier power on, the
speakers may be damaged.
• The output sound of the player has a wide dynamic range.
Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by
a sudden high volume sound.
Notes
• Refer to the owner’s manual of the connected equipment as
well.
• If you place the player near a tuner or radio, the radio
broadcast sound might be distorted. In this case, place the
player away from the tuner and radio.
SDP95SWNE53-80.indd63SDP95SWNE53-80.indd63 2011/02/1816:43:192011/02/1816:43:19