Need help?Do you have a question about the Toshiba SY-335 and is the answer not in the manual?
General| Speaker load impedance | 4Ω to 16Ω |
|---|---|
| Type | Integrated Stereo Amplifier |
| Frequency response | 10Hz |
| Damping factor | 40 |
| Input sensitivity | 150mV (line) |
| Power output | 35 watts per channel into 8Ω (stereo) |
Details input jack sensitivities and impedance values for various audio sources.
Specifies the output voltage levels for tape recording and pre-amplifier outputs.
Details the frequency response range for AUX and PHONO inputs.
Covers power supply voltage, consumption, weight, and physical dimensions.
Identifies and describes controls visible on the front panel of the preamplifier.
Details the input/output jacks and power cord connections on the rear panel.
Step-by-step guide for removing the top cover of the unit.
Instructions for detaching the bottom cover of the unit.
Procedure for safely removing the front panel assembly.
Lists transistors, diodes, and integrated circuits with their part numbers.
Compiles switches, jacks, and transformers with corresponding part numbers.
Details capacitor types, values, and part numbers used in the circuit.
Lists fixed resistors by symbol number, part number, and resistance value.
Lists variable resistors (potentiometers) with their specifications and part numbers.
Lists physical components of the unit's casing, including knobs, plates, and screws.
Lists included accessories such as the owner's manual.
To Next Page
