Toshiba T-Series T3200 User Manual

Toshiba America Information Systems Inc. ("TAIS") shall not be liable for damages of any kind for use of this information, which is subject to
change without notice. Copyright 1994 TAIS. 3200.doc Rev. 2 04/04/00 MQC/nmm.
Page 1
T3200
(No longer manufactured)
General Information
Model number: PA7039U (FCC ID# CJ69XAE492)
Dimensions: 14.6"W x 15.6"D x 3.9"H
Weight: 19 lbs.
Voltage: 115 (104 to 127) VAC, 2.5A
230 (207 to 253) VAC switch selectable
Frequency: 50/60 (49 to 61) Hz
CPU: 80286-12 (12/6MHz); 80287-8 coprocessor socket
RAM memory: 1MB RAM standard (640K Conventional; 384K LIM-EMS 3.2)
Memory expandable to 4MB when optional 3MB memory card is added
Video RAM: 256KB
Number of keys: 85
Keyboard type: Internal PC, external 101-key enhanced keyboard port
Drives: One 1.44MB 3.5" floppy disk drive (later models) or
One 720KB 3.5" floppy disk drive (earlier models)
One 40MB hard disk drive
Operating system included: Toshiba MS-DOS 3.2, 3.30, or 4.01
Software Compatibility
Compatible with software written for the IBM PC/XT/AT using MDA, EGA, CGA, Hercules monochrome, or T3100/AT&T
6300 640 x 400 high resolution graphics mode
Interfaces
RGB color video port (CGA, EGA, MDA, Hercules monochrome)
RS-232-C serial port
101-key keyboard port
Parallel printer/external diskette or tape drive port
Toshiba proprietary memory slot
2 expansion interface slots (one IBM PC/ XT/286 compatible full length low profile 16 bit ISA slot, one IBM PC/XT
compatible half length low profile 8 bit ISA slot)
Orange Gas Plasma Display
Display area: 8.5"W x 5.75"H; 10.25" diagonal
Resolution: 720 x 400
Gray scales: 4
Contrast: 10 : 1
3.5" 40MB Hard Disk Drive
Fujitsu HDD: M2227DT
Number of heads: 8
Number of cylinders: 615
Average access time: 38 ms
Recording method: MFM
Interleave: 3 : 1
TEST3 setup type: 4
T3200
(continued)

Toshiba T-Series T3200 Specifications

General

Manufacturer	Toshiba
Category	Laptop
Operating System	MS-DOS
Ports	Serial, Parallel, External Floppy
Floppy Drive	3.5" 1.44 MB

Summary

General Information and Specifications

System Specifications

Details model, dimensions, weight, voltage, frequency, CPU, RAM, and video RAM.

Input and Storage

Covers keyboard, drives, and operating system.

Software Compatibility

Lists compatible software and graphics modes for IBM PC/XT/AT.

Display and Storage Details

Details the plasma display and HDD specifications.

Expansion and Controls

Expansion Slots

Details IBM PC/XT/286 compatible ISA expansion slots and power.

Soft Switches

Explains function key combinations for system settings like CPU speed.

Hardware Controls

Covers physical switches for power, drive selection, display brightness, and DIP settings.

DIP Switch Bank Settings

Lists functions for each of the 8 DIP switches.

System Environment and Memory

Environmental Specifications

Details operating and non-operating temperature and humidity ranges.

Optional Accessories

Lists available external hardware and software options for the system.

System Memory Map

Outlines memory addresses and their usage for system components.

System Interrupts and I/O Ports

Interrupt Assignments

Details interrupt levels (NMI, 0-14) and their assigned functions.

I/O Port Assignments

Lists I/O port addresses and the devices/functions they control.