Toshiba TC-net - Page 19

2. Setting-Up OPC Server
11
<2>Select “TC-net OPC Server SATOPCSA
VXX.XX” and click <Install>.
(VXX.XX is the version.)
<3> Select <Modify> and click <Next>.
<4>Change installation type.
Click <Next>.
<5>An inquiry doing DCOM setting is displayed.
When set it automatically, Click < Yes >.
When set a manual operation later, Click < No >.
A displayed message changes
by the installation
type that selected in <6>.
About contents of setting, please refer to "3.1.
DCOM Setting ".
* : DCOM setting function added in V01.40.
<6> DCOM setting is completed.
Click < OK >.