Why is my Toshiba Timer not operating my air conditioners as scheduled?
Your Toshiba Timer may not be operating your air conditioners as scheduled because the timer has been disabled or a holiday has been scheduled.
What to do if the present time indication is blinking on my Toshiba Timer?
If the present time indication on your Toshiba Timer is blinking, it indicates that there was a power outage. To resolve this, press the PROGRAM button.
How to fix blinking on Toshiba Timer display?
If you see blinking in the present time display area of your Toshiba Timer, it signifies that power to the air conditioner was lost for a long period of time. You need to set the present time and today’s day of the week again.
What to do if Toshiba Control Panel air conditioners start/stop with the remote, even when disabled?
If your Toshiba Control Panel allows air conditioners to be controlled by the remote even when the program disables it, this can happen if power to the air conditioner was lost and then restored. To fix this, you need to reset the system.
Why don't my Toshiba Control Panel air conditioners operate as scheduled?
If your Toshiba Control Panel air conditioners aren't operating as scheduled, there are a couple of possible reasons: * The timer might be disabled, so you should enable it. * A holiday may have been scheduled, so you should check the holiday schedule.
What to do if the Toshiba Control Panel blinks in the present time display?
If your Toshiba Control Panel is blinking in the present time display area, it likely means that power to the air conditioner was lost for a long period. You'll need to set the present time and day of the week again.
Why does 'Check before requesting servicing' blink on my Toshiba Control Panel display?
If 'Check before requesting servicing' is blinking on your Toshiba Control Panel display, it indicates that the schedule timer is currently performing initial communications with the connected indoor units. Allow the communications to finish.
To Next Page
General