Need help?Do you have a question about the Toshiba TDP-S35 and is the answer not in the manual?
General| Aspect Ratio | 4:3 |
|---|---|
| Lamp Type | UHP |
| Weight | 2.9 kg |
| Display Type | DLP |
| Projection Size | 0.76 - 7.62 meters (30 - 300 inches) |
| Inputs | S-Video x 1, Composite Video x 1 |
| Resolution | 800 x 600 (SVGA) |
| Lamp Life | 2000 hours (normal mode), 3000 hours (eco mode) |
Critical warnings, electrical safety, and handling precautions to prevent hazards.
Detailed instructions for safe operation, placement, and maintenance of the projector.
Advice on packing, condensation, placement, and environmental factors for optimal use.
Disclaimers of responsibility for damages arising from specific events or improper use.
Covers copyright, disposal, trademarks, and conventions used in the manual.
Guidelines for proper battery usage, replacement, and safety for the remote control.
Lists items included in the projector package and instructions for verification.
Identifies and describes the function of each component on the projector's main body.
Details the buttons and indicators on the projector's control panel and remote.
Identifies the various input/output terminals and connectors on the projector's rear.
Describes the components and functions of the TDP-SC35 document camera.
Instructions for loading batteries and operating the remote control effectively.
Explains different placement styles and projection distance/size calculations.
Guides on connecting the projector to various external devices.
Step-by-step instructions for powering the projector on, off, and standby modes.
Covers initial setup, language/lamp selection, device activation, and input selection.
Details how to adjust the projector's angle using foot and tilt adjusters.
Explains how to use the zoom lever and focusing lever for image adjustment.
Introduces features like auto setting and keystone correction for image optimization.
Explains how to navigate and use the projector's on-screen menus for settings.
Covers settings related to screen size, language, icon display, and start-up screen.
Details settings for projection mode, power-off timer, input search, and lamp/fan modes.
Shows how to view input signal status, lamp usage, and firmware version.
Provides instructions for setting up and using the TDP-SC35 document camera.
Information on the lamp's characteristics, lifespan, and potential hazards.
Detailed steps and precautions for replacing the projector lamp safely.
Guidelines for cleaning the projector's lens and exterior casing.
Explains the meaning of indicator lights for internal abnormalities and error codes.
Troubleshooting guide to check common issues before contacting customer service.
Provides technical details, including power, dimensions, weight, and components.
Comprehensive list of physical and electrical specifications for the projector.
Details the range of RGB resolutions and refresh rates supported by the projector.
Lists the supported component video (Y/PB/PR) signal formats.
Lists the supported video and S-Video signal formats.
Shows the pin configurations for the projector's computer and monitor connectors.
Details the RS-232C control terminal's pin assignment and communication format.
Lists common commands for controlling the projector via the RS-232C interface.
Lists optional accessories that are available for purchase.
To Next Page
