User’s Manual 7-9
HW Setup and Passwords
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.
Built-in LAN
This feature enables or disables the Built-in LAN.
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the USB KB/Mouse Legacy Emulation
item to Enabled.
USB-FDD Legacy Emulation
Use this option to enable or disable USB-FDD Legacy Emulation.
Enabled Enables Wake-up on LAN.
Disabled Disables Wake-up on LAN. (Default)
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Enabled Enables Built-in LAN functions. (Default)
Disabled Disables Built-in LAN functions.
Enabled Enables the USB KB/Mouse Legacy Emulation.
(Default)
Disabled Disables the USB KB/Mouse Legacy Emulation.
Enabled Enables the USB-FDD Legacy Emulation.
(Default)
Disabled Disables the USB-FDD Legacy Emulation.
To Next Page
Loading...
