User’s Manual 7-6
HW Setup and Passwords
USB
Legacy USB Support
Use this option to enable or disable USB KB/Mouse Legacy Emulation.
If your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the USB KB/Mouse Legacy
Emulation
item to Enabled.
LAN
Wake-up on LAN
This features lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.
Built-in LAN
Enabled Enables the USB KB/Mouse Legacy Emulation.
(Default)
Disabled Disables the USB KB/Mouse Legacy Emulation.
Enabled Enables Wake-up on LAN.
Disabled Disables Wake-up on LAN. (Default)
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Wake-up on LAN does not work without the AC adaptor.
Leave it connected, if you are using this feature.
Enabled
Enables built-in LAN functions. (Default)
Disabled
Disables built-in LAN functions.
To Next Page
Loading...
