3-4 User’s Manual
Getting Started
2. Connect the AC adaptor’s DC output plug to the DC IN 15V jack on the
back of the computer.
Figure 3-4 Connecting the adaptor to the computer
3. Plug the power cord into a live wall outlet. The Battery and DC IN
indicators on the front of the computer should glow.
Opening the display
The computer’s LCD display panel can be opened in a wide range of
angles for optimal viewing.
1. Slide the display latch on the front of the computer to unlatch the
display panel.
2. While holding down the palm rest with one hand so that the main body
is not raised, lift the panel slowly. Adjust the angle of the panel to
provide optimal clarity.
Figure 3-5 Opening the LCD display panel
AC adaptor's DC
output plug
DC IN jack
Use reasonable care when opening and closing the LCD display panel.
Opening it vigorously or slamming it shut could damage the computer.
Display latch
LCD display panel
To Next Page
Loading...
