Toshiba Tecra R950 - Using a Supervisor Password

126
Utilities
Setting passwords
Using a supervisor password
A supervisor password prevents other users from changing
hardware configuration options.
Setting a supervisor password
If you choose to set a supervisor or user password, TOSHIBA
strongly recommends that you save your password in a location
where you can later access it should you not remember it.
TOSHIBA is not responsible for any losses that may occur to you, your
organization or others as a result of the inability to access the computer.
To set a supervisor password:
1 Click the Start button and, in the Search field, type TOSHIBA
Assist. In the list that appears above, click on your selection.
The TOSHIBA Assist window appears.
2 On the left side, click the Secure tab.
3 Click the Supervisor Password icon.
The Supervisor Password tab of the TOSHIBA Password
Utility window appears.
(Sample Image) Supervisor Password Utility window
4 Click Set.
A pop-up screen appears asking for a password.
5 Enter your password, and then enter it again to verify.