62
PROBLEM SOLVING
English
Other problems
If your TV’s problem is not addressed in this Questions and
Answers section or the recommended solution has not
worked, do one of the following:
1 Turn off your TV. After 30 seconds, turn it on.
2 Turn off the TV and unplug the power cord. After 1
minute, plug the power cord in and turn on the TV.
3 Perform the Reset Factory Defaults procedure (see
page 54).
Q
What do the LEDs on the front of the television
indicate?
A
Check the table below.
LED indication
Condition Solution
LED-1 LED-2
Green Orange Power ON
Programme Timer is set
–
Green OFF Power ON
Programme Timer is NOT set
–
Red Orange Power OFF (Standby)
Programme Timer is set
–
Red OFF Power OFF (Standby)
Programme Timer is NOT set
–
Orange Orange Active Standby (for OAD)
Programme Timer is set
–
Orange OFF Active Standby (for OAD)
Programme Timer is NOT set
–
Orange Green For Service
SW Upgrade in Progress
–
Red OFF For Service
SW Upgrade Failed
–
Green OFF For Service
SW Upgrade Successful
–
To Next Page
Loading...
