User Manual: Toshiba-TMPM330
Page | 3
Chapter 1: Introduction
The TMPM330 is an evaluation stamp board which is exploring the complete features of the new
ARM Cortex-M3 TMPM330FDFG microcontroller by Toshiba.Featuring a Toshiba TMPM330FDFG
microcontroller, the MCBTMPM330 Evaluation Board offers 512KB Flash, 32KB SRAM, a 10 channel
16-bit Timer, a 12 channel 10-bit ADC, real-time clock and watchdog, 3 UARTs, 3 I2C interfaces and
79 GPIO Pins.
TMPM330 Stamp Specifications
• Dimensions: 64.26 mm x 49.53 mm
• Two layer PCB (FR-4 material)
• USB mini connector ( as power source) with power indicator
• On-board linear regulators generate +3.3V/1A from power supply
• Extension headers for all Micro-controller pins
• One RS232 port connector
• 256Kb I2C based EEPROM
• 10 JTAG connector
• On-board two test LED's
• On-board user and reset switches
Chapter 2: CoFlash Installation & Flashing Binary codes
2.1:Installation & Configuration of CoFlash software
Follow the steps given below.
Step 1: Open CoFlash-1.4.6.exe setup downloaded from internet.
To Next Page