Toshiba TOSNUC 92 - User Manual

STE 73843–4
CONNECTION MANUAL
TOSNUC 92
!
WARNING
• Read this manual before equipment installation and
wiring.
• Save this manual for future reference.
February, 2004
TOSHIBA MACHINE CO., LTD.
Shizuoka, Japan

Summary

1. General Descriptions

2. Configuration

2.1 System Configuration

Describes the overall system architecture and major components.

2.2 Configurations of Units

Details the various modules, their types, and primary functions.

2.3 Selective Specifications

Discusses available variations and selective specifications for system components.

3. Installation and Environmental Conditions

3.1 Environmental Conditions

Specifies operating and storage environmental conditions for all units.

3.1.1 Units

Details ambient temperature, humidity, vibration, and impact limits for units.

3.1.2 Cabinet

Outlines environmental conditions for cabinets and operation boxes housing the equipment.

3.2 Power Supply

Specifies input power requirements, voltage, and capacity for the system.

3.3 Cabinet Design Conditions

Provides guidelines for designing cabinets considering noise resistance and maintenance.

3.4 Unit Installation and Restrictions

Covers general installation guidelines and restrictions for all system units.

3.5 Heat Design of Cabinet

Explains principles for heat design to ensure adequate heat dissipation within cabinets.

3.6 Measures against Noise and Grounding

Details strategies to mitigate noise and ensure proper grounding for system stability.

4. Connection

4.1 Overall System Diagram

Provides a high-level overview of the complete system's electrical connections.

4.2 POWER Module - T9 PW2

Details the T9PW2 Power Module, its components, and connectors.

4.3 MAIN Module - T9 NC1

Details the T9NC1 Main Module and its various communication interfaces.

4.4 SERVO Module - T9 SV1

Details the T9SV1 Servo Module and its encoder input connections.

4.5 Operation & Display Unit (NPN1)

Details all connections for the NPN1 Operation & Display Unit.

4.6 User Media Drive Unit (FDU2)

Details the FDU2 unit, its functions, and power supply.

4.7 Portable MPG Box

Describes the portable manual pulse generator (MPG) box and its features.

4.8 Machine Input;Output

Details distributed I/O modules connectable to the CNC system.

4.9 Servo Drive; Power supply Unit

Covers connections to various servo drive and power supply units.

4.10 Others

Covers miscellaneous items, including mounting protection breakers.

5. Setting and Adjustment

5.1 MAIN Module - T9 NC1

Covers setting and adjustment procedures for the T9NC1 Main Module.

5.2 Operation & Display Unit - T9 PN**

Covers setting and adjustment procedures for the T9PN** Operation & Display Unit.

6. Other Cautions

6.1 SPG Selecting Conditions

Specifies required conditions for the spindle pulse generator (SPG).

6.2 Reference Point Return

Explains methods for reference point return using CNC-PLC interface signals.

6.3 Stroke end Limit Switch Signal

Details input methods for stroke end limit switch signals to CNC or PLC.

7. Emergency Stop Signal

8. Appendices

8.1 Outline drawing and Set Dimensions of Each Unit

Provides physical outline drawings and set dimensions for each system unit.

8.2 Recommended Cable Drawings

Lists and details recommended cable drawings for system connections.

Toshiba TOSNUC 92 Specifications