Disassembly and Reassembly
Toshiba
4-11
1-2-12 Lever Tension Ass
’
y,
Band Brake Ass
’
y Removal
1) Remove the Lever Brake S Ass'y (Refer to Fig 4-22)
2) Remove the Spring Tension Lever Œ.
3) Rotate stopper of Main Base in the direction of
arrow “A”.
4) Lift the Lever Tension Ass'y ´ & Band brake
Ass'y ˇ.
Note
:
1) When replacing the Lever Tension Ass'y ´, be sure
to apply Grease on the post,
2) Take care not to touch stain on the felt side, and not
to be folder and broken Band brake Ass'y
3) After Lever Tension Ass'y seated, Rotate stopper of
Main Base to the Mark[B].
Œ
SPRING TENTION LEVER
STOPPER
MARK[B]
"A"
´
LEVER TENTION ASS`Y
ˇ
BAND BRAKE ASS`Y
Fig. 4-21 Lever Tension Ass
’
y,
Band Brake Ass
’
y Removal
1-2-11 Lever Pinch Drive,
Lever Tension Drive Removal
1) Remove the Lever Pinch Drive
Œ
, Lever Tension
Drive ´.
Œ
LEVER PINCH DRIVE
´
LEVER TENSION DRIVE
Fig. 4-20 Lever Pinch Drive,
Lever Tension Drive Removal
To Next Page
Loading...
