Toshiba V-632EF - Maintenance and Adjustment Information; 5. Alignment and Adjustment; Adjustment Button Locations

Toshiba
5-1
5. Alignment and Adjustment
5-1 Reference
1) X-Point (Tracking center) adjustment, “Head switching adjustment” and “NVRAM option setting” can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the “Head switching adjustment” and
“NVRAM option setting”.
3) When replacing the cylinder ass’y, be sure to adjust the “X-Point” and “Head switching adjustment”.
4) Remote control used for same chassis as a accessory is available for all adjustments.
5) How to adjustment.
- Press the “SW703” button on Main PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.
5-1-1 Location of adjustment button of remote control
Fig. 5-1
X-Point (Tracking Center)
Adjustment
Head Switching Adjustment
NVRAM Option Setting
STD/DBL
MONIT.SAT.DOUB.SON
1
2
3
4
5
6
7
8
9
0
AUDIO
MENU
TV/VIDEO
VT-752EF
RALENTI
LECT.
RET.RAP.
ARRET
AUTO.
ENRG.
MARCHE
PROG.TV
AV.RAP.
PAUSE /AR.IMAGE
SOURCE
COMPT. /RESTE
INDEX
AJUST.
IM/ IM
CURSOR
OK
DISP.
EJECT.
PROG.
CONT.SAT.
IMAGE
All manuals and user guides at all-guides.com