Reference Information
Toshiba 2-7
21
PLAYBACK
PLAYBACK
Variable Speed Playback
You can play back a tape at various tape speeds.
Picture Search
A tape runs at 5 times or 7 times the normal playback speed so
that you can quickly locate a particular scene.
1
Press
FF
or
REW
during playback.
The tape runs at 5 times the normal playback speed.
2
To change the tape speed to 7 times the normal playback
speed, press and hold
FF
or
REW
.
If you release it, the tape speed returns to 5 times.
Note
If you press
FF
or
REW
during picture search, the mode changes to fast-
forwarding or rewinding.
To resume normal playback
Press
PLAY
.
Still Picture
A picture freezes so that you can watch closer.
1
Press
PAUSE/STILL
during playback.
The picture freezes.
To resume normal playback
Press
PAUSE/STILL
again.
Notes
• The still mode is automatically cancelled after about 5 minutes and returns to
normal playback.
• The still picture may shake if a picture of a fast-moving object or scene is
frozen. This is not a defect in the unit.
Adjusting Still Picture Stability
If the still picture is distorted or flickers, hold down one of
CH/TRK
until
the picture becomes stable.
Note
The distortion of the still picture may not be eliminated completely.
SLOW
PAUSE/STILL
REC TIMER
TV
VCR
POWER
I.SELECT
SP/SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
REMAIN/
RESET
COUNT
EJECT
CM SKIP
1
2
3
6
5
4
100
9
87
0
STOP
ENTER
A.SELECT
FF
REW
PLAY
PLAY
FF
REW
PAUSE/STIL
L
SLOW
CM SKIP
Commercial Movie Skip
You can skip a portion of playback you do not want ( such as a
commercial ) and then return to normal playback.
1
Press
CM SKIP
during playback.
The VCR will automatically search forward for 30 seconds to
a maximum of 3 minutes ( six presses ) and then resume
normal playback.
20
Adjusting the tracking
When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound
(Digital Auto Tracking).
If the VCR cannot locate the best possible tracking point, hold down one of
CH/TRK
to adjust the
tracking manually.
Notes
• During the adjusting, the playback picture and sound may be distorted.
• The digital auto tracking is activated only in the playback mode.
• The noise on the screen may not be completely eliminated depending on the tape used, especially when the
tape was recorded on another VCR.
Basic Playback
1
Load a recorded cassette.
Power is turned on.
If the cassette has no safety tab,
playback starts automatically.
2
Press
PLAY
to start playback.
3
To stop playback, press
STOP
.
To resume normal playback Press
PLAY
.
Rewinding / Fast-forwarding
Press
REW
or
FF
in the stop mode.
S
SLP
VCR
REC
L
TIMER
PLAYBACK
Playback
This section explains the basic playback operation.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Press VCR to set the remote control operating the VCR.
ST
VCR
L
SLOW
PAUSE/STILL
REC TIMER
TV
VCR
POWER
I.SELECT
SP/ SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
REMAIN/
RESET
COUNT
EJECT
CM SKIP
1
2
3
6
5
4
100
9
87
0
ENTER
A.SELECT
STOP
FF
REW
PLAY
CH/TRK
2
FF
REW
3
1
Press
PLAY
during playback.
A tape runs at double speed
playback.
Double Speed Playback
S-VHS Quasi Playback (SQPB)
• This VCR can also play back at tape which is recorded in S-VHS format.
But the playback pictures does not have the same quality and resolution as the original S-VHS
playback picture.
• This VCR cannot record in S-VHS format.
• SQPB is an abbreviation for S-VHS Quasi Playback.
VCR
To Next Page
Loading...
