Reference Information
2-10 Toshiba
27
RECORDING
5
Move to the next using
FF
, and set
the recording date using
PLAY
or
STOP.
The date changes as follows:
[WKLYSU]
…
[WKLYSA]: You can record TV programs on the same
channel on the day and time every week.
[MO~FR]: You can record TV programs on the same channel on the
day and time Monday through Friday.
6
Move to the next using
FF
, and set
the hour and minutes of the
recording start time.
7
Move to the next, and set the
recording off time.
8
Move to the next, and select the
tape speed (SP) using
PLAY
or
STOP
.
For the tape speed “AUTO (Auto Speed
Select)”, see below.
To set another program, press
FF
, and
select the next line pressing
STOP.
Repeat steps 4 to 8.
9
Press
PROG.
.
Now programming is completed.
10
Press both
TIMER
simultaneously.
The power turns off and the VCR enters
the timer standby mode.
Auto Speed Select
If you are not sure the tape is long enough for
timer program recording in the SP tape speed,
set the recording tape speed to “AUTO”.
Recording starts in the SP tape speed and the
VCR automatically selects the tape speed to
record the program to the end. If the tape length
is not long enough, the tape speed automatically
changes from SP to SLP.
Notes
• Make sure that the tape length is selected correctly
according to the tape used on the SET UP screen
(page 23).
• When the SLP tape speed is selected and the tape
length is not sufficient to record the program to the
end, the program cannot be recorded to the end.
• The picture will be distorted when playing the part
where the recording tape speed is switched from
SP to SLP with the Auto Speed Select feature.
Hi-Fi
STERE
O
SAP
L
TIMER
Timer Program Recording (continued)
→ 8/25 → 9/25 →
…
→ 7/25 →
WKLY
SU →
…
MO~FR ←
WKLY
SA ←
REC
TIMER
P
M
26
Timer Programming Procedure
Example: To record cable channel 25 in the SP tape speed from
9:20 p.m. until 10:00 p.m. on August 30. Today is August 25.
1
Load a cassette with the safety tab attached.
2
Press
PROG
. to display the MENU screen.
3
Select “PROGRAM” using
FF
or
REW
, and press
ENTER
.
4
Move to the next using
FF
, and
select the channel number 25 by
pressing
number buttons
2 and 5,
PLAY
or
STOP.
• You can make “L1/L2”( For W-522 only) or “ L” ( For W-422 only)
appear on the channel number position by pressing
I.SELECT
depending on your connection.
(See pages 13).
To make corrections:
Press
REW
to move back to the item, or
FF
to forward.
(Continued)
Timer Program Recording
The programmable timer allows you to record up to 6 different programs over one month.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Make sure that the clock is set correctly (page 16).
• Store the channels on the VCR (pages 17 and 18).
RECORDING
SLOW
PAUSE/STILL
REC TIMER
TV
VCR
POWER
I.SELECT
SP/SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
REMAIN/
RESET
COUNT
EJECT
CM SKIP
A.SELECT
1
2
3
6
5
4
100
9
87
0
FF
REW
PLAY
ENTER
STOP
Number
buttons
10
2,9
PLAY
FF
ENTER
STOP
REW
To Next Page
Loading...
