Reference Information
Toshiba 2-5
17
PREPARATION
Incoming Antenna/Cable(CATV) Signals
The VCR scans through all receivable TV and CATV channels and stores only the active
ones in your area into the memory. Once the storing is finished, you can select a desired
channel using
CH/TRK
.
Preparation
• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 12).
• Press
I.SELECT
so that the channel number will appear if “L1 / L2”(For W-522 only) or ”L” (For W-422 only)
is displayed in the VCR display.
Incoming Antenna/Cable(CATV) Signals
1
Press
PROG
. to display the MENU screen.
2
Select “PRESET” using
FF
or
REW
,
and press
ENTER
.
3
Select “CH MEMORY” using
PLAY
or
STOP
, and press
ENTER
.
4
Set “TV/CATV“ to “TV” or “CATV” using
FF
or
REW
.
TV: To store channels received via the antenna.
CATV: To store channels received via the incoming cable.
5
Select “AUTO SCAN” using
PLAY
or
STOP
, and press
FF
to set to “ON”.
The VCR starts scanning and the
channels are stored in the VCR in
ascending order. When the scanning is
finished, the screen automatically
returns.
6
Press
PROG.
twice to exit.
PREPARATION
Storing Channels on the VCR
This section is required if you receive only normal TV or unscrambled cable channels.
E
n
D : PROG
TV/CATV TV CATV
AUTO SCAn OFF On
ADD CH - - CH
ERASE CH - - CH
E
n
D : PROG
AUTO SCAn 2 CH on
E
n
D : PROG
ENTER
CLOCK SET
CH MEMORY
SLOW
PAUSE/STILL
REC TIMER
TV
VCR
POWER
I.SELECT
SP/SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
REMAIN/
RESET
COUNT
EJECT
CM SKIP
A.SELECT
ENTER
STOP
FF
REW
PLAY
REW
FF
PLAY, STO
P
1,6
ENTER
1
2
3
6
5
4
9
87
0
I.SELECT
100
100
Number
buttons
16
8
Press
ENTER
to start the “AUTO” clock
set feature.
After the VCR is turned off, it automatically
updates the clock using the data broadcast
by the local TV stations.
*
The clock is
revised by
broadcasting
signal at 8:00 A.M
every morning.
9
Select the options using
FF
or
REW
.
Change the data using
PLAY
or
STOP
.
1) Set “SUMMER TIME
(Daylight-Saving Time)”.
DST start: Daylight-saving time begins on
the first Sunday in April. Because the
clock automatically changes from 2:00 AM
to 3:00 AM (forward one hour).
DST end: Daylight-saving time ends on
the last Sunday in October. The VCR
clock automatically changes from 2:00 AM
to 1:00 AM (back one hour).
remember that any part of a scheduled
Timer Recording that falls between these
two times will not be recorded.
AUTO: the VCR is using the clock data
Broadcast by the local TV stations.
IN: You want to use the DST function, and
you are leaving in the area that apply
Daylight-saving time.
OUT: You are not leaving in the area that
apply Daylight-saving time and you do not
want to use DST function.
2) Set “TIME ZONE”.
If you select “AUTO” for your time zone,
the VCR sets the clock using the first
Coordinated Universal Time information it
finds. If the time is not correct, select
another time zone or use the “MANU”
option.
3) Set “CLOCK DATA CH”.
If you don't know the clock data channel,
select “AUTO”. The VCR will scan
automatically to tune the channel carrying
the clock data.
If AUTO CLOCK SET is unsuccessful, set the
time and date through the “MANU” clock
set menu selection.
10
Press
PROG.
.
Now the clock starts.
Setting the Clock
Example: To set the clock to 2:30 p.m. on
August 25 (summer time) 2002.
1
Press
PROG.
.
The MENU screen appears on the TV.
2
Select “PRESET” using
FF
or
REW
,
and press
ENTER
.
3
Press
ENTER
to select “CLOCK SET”.
4
Select “AUTO” or “MANU” using
PLAY
or
STOP
.
AUTO
: The VCR automatically sets or
adjusts the clock.
If you select “AUTO” mode, proceed to step 8.
MANU
: You can set the clock manually.
If you select “MANU” mode, proceed to next
step.
5
Vary the digits to set the hour.
PLAY
: To increase.
STOP
: To decrease.
6
Move to the next using
FF
(To move back, press
REW
.)
7
Repeat step 5 and 6 to set the minutes,
month, day, and the year (by the last
two digits).
Proceed to step 10 to start the clock.
E
n
D : PROG
ENTER
CLOCK SET
SUMMER TIME
TIME ZOnE CH
SCA
nn
I
n
G
n
O
W
E
n
D : PROG
ENTER
CLOCK SET
SUMMER TIME
TIME ZO
n
E CH
P R E S S E n T E R
T O S T A R T S E T T I n G
E
n
D : PROG
ENTER
CLOCK SET
CH MEMORY
To Next Page
Loading...
