Toshiba W-608 - Automatic Setup Process; Performing the Auto Setup; Auto Setup Notes and Cancellation

13
PREPARATION
Auto Set Up
The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.
PREPARATION
Auto Set up
1
Plug the VCR into the AC outlet
2
“AUTO” blink while the VCR automatically sets the clock
using the data broadcast by the local TV stations.
While “AUTO” is blinking, channel memory is also set
automatically.
3
When Auto set up has been completed, the VCR is on
standby mode.
Notes
• It may takes several minutes during the Auto set-up
• Press CANCEL on the remote control to cancel the auto set-up.
78
0
100
9
65
23
4
1
STOP
PLAY
FFREW
CANCE
L
W-608/TSB (ENG) 1/17/01, 11:04 AM13