Toshiba W-614 - Auto Set Up

13
PREPARATION
Auto Set Up
The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.
PREPARATION
Auto Set up
1
Plug the VCR into the AC outlet
2
“Auto” blink while the VCR automatically sets the clock using
the data broadcast by the local TV stations.
While “Auto” is blinking, channel memory is also set
automatically.
3
When Auto set up has been completed, the VCR is on
standby mode.
Notes
• It may takes several minutes during the Auto set-up
• Press CANCEL on the remote control to cancel the auto set-up.
CANCE
L
SLOW
PAUSE/STILL
STOP
FF
REC
TIMER
VC-513
A.SELECT
TV
VCR
POWER
I.SELECT
SP/ SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
1
2
3
4
5
0
100
6
REW
PLAY
REMAIN/
RESET
COUNT
9
87
ENTER
EJECT
W-614/612/TSB DRAFT(10-18) 11/12/01, 12:0013