12
Cable Connection
Choose one of the below according to your usage of the cable box.
This set-up will enable you to:
– record an unscrambled channel.
– watch an unscrambled channel while recording
it.
– record an unscrambled channel while watching
another (only when you connect a cable-
compatible TV).
You will need to:
• select TV channel 3 or 4 to receive video
signals. (See page 11.)
• to record a channel while watching another,
press
TV/VCR
on the remote control to turn off
the “VCR” indicator in the VCR display and
select a desired channel on the TV (only when
you connect a cable-compatible TV).
This set-up will enable you to:
– record an unscrambled channel.
– watch an unscrambled channel while recording
it.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the
cable box.
• turn on the cable box and select cable channel
3 or 4 according to the output channel of the
VCR.
• to record a channel while watching another,
press
TV/VCR
on the remote control to turn off
the “VCR” indicator in the VCR display and
select a desired cable channel on the cable
box.
Connections (continued)
Incoming cable
Cable Box
Incoming cable
IN OUT
To Next Page
Loading...
