User's Manual 2-5
2. Plug the other smaller connector of the Micro-USB cable into
the
| l1
icro-USB
port on your
tablet
You can also eatablish connection through the provided "USB
Data
and
Charge
Y-Cable".
Please refer to the USB
device
section for
more
details
Figure
2-2
Plugging
the
Micro-USB cable into tablet
(W
T1
0-A
)
Figure 2-3 Plugging
the
Micro-USB cable into tablet
(WT8-B)
Product appearance depends on the
model
you
purchased
The Micro-USB connector
ofthe
Micro-USB cable must be
correc
t.
plugged into the Micro-USB
p
á
t
on the tablet. Failure to do so
correctly
may result in possible damage to the Micro-USB
port
3. Plug the AC
adaptor
into a live wall
outlet
Tuming on the power
This
section describes
how to turn on the
power
•
After you turn on the power for the first ti Jedo not turn it off until
you
have set up the operating
system
•
Volum
e
cannot
be
a
iuste
d
during
Windows
Setup
To Next Page
Loading...
