User's Manual
7-3
For the United States and
Canada
two
pin plug configuration must be
a
2-15P (250
V)or 1-15P (125V) and three pin plug configuration must
be
6-15P (250
V)or 5-15P (125V) as designated in the U.S. National
Electrical
code handbook and the Canadian Electrical Code Part
11
The following illustrations show the plug shapes for the
U.S.
A.
and
Canadathe
United
KingdomAustraliaEurope
and
China
USA
United Kingdom
D
UL approved
BS
approved
Australia
Europe
AS approved Approved by the
appropriate
agency
Canada
China
CSA approved CCC
approved
Information for Wireless Devices
Wireless Technology
Interoperability
The Wireless LAN is compatible with other LAN systems Direct
Sequence
Spread Spectrum (DSSS)
IOrthogonal
Frequency Division
Multiplexing
(OFDM) radio technologyand is compliant
to
•
The
1
EEE 802.11 Standard on Wireless LANs (Revision
a!
b/g/
n
b/g/n
or Revision a/b/g/n/ac)as defined and approved by the Institute of
Electrical and Electronics
Engineers
Bluetooth
@
Modules are designed to be interoperable with any product
with
Bluetooth wireless technology that is based on Frequency Hopping
Spread
Spectrum (FHSS) radio
technologyand
is compliant
to
•
Bluetooth Specification (depending on the model you
purchased)
as
defined and approved by the Bluetooth
Speciallnterest Group
•
Logo certification with Bluetooth wireless technology as defined by
the
Bluetooth Special interest
Group
This Bluetooth product is not compatible with devices using
Bluetooth
Version 1.0B
specifications
To Next Page
Loading...
