Tosibox Lock User Manual

Quick Start Guide v2.5
Copyright © Tosibox Oy, 2014
Serializing the Lock and Key
Deploying into Broadband Networks
A) Connect an internet-connected ethernet
cable to the Lock’s WAN port.
B) Plug the devices into the Lock’s LANports
(LAN 1-3 or connect wirelessly via WLAN).
If the devices have static IP addresses,
please see “Deploying the Lock” in the user
manual.
1
2a
Tosibox Lock
Tosibox Key
B
AC Adapter
A
A) Connect the AC adapter to the Lock and wait
for 2 minutes.
B) Serialize the Key to the Lock by inserting the
Key into the USB port of the Lock. When the
LED on the Key stops blinking, the serializa-
tion is complete.
C) Go to if deploying into broadband
networks or if deploying into mobile
networks.
Tosibox Lock
Remote user
2G/3G/4G, xDSL
2G/3G/4G,
xDSL
Firewall & NAT Friendly
Firewall & NAT Friendly
Internet /xDSL router
WAN
2a
2b

Tosibox Lock Specifications

General

WAN Ports	1
Firewall	Yes
Compatibility	Tosibox ecosystem
Connectivity	Wireless, Ethernet
LAN Ports	4
Power	12-24V DC

Summary

Serializing the Tosibox Lock and Key

Lock and Key Serialization Steps

Connect the AC adapter to the Lock, then insert the Key into the Lock's USB port until the LED stops blinking.

Deployment Path Selection

Choose between broadband network deployment (2a) or mobile network deployment (2b).

Deploying into Broadband Networks

Broadband Network Connection

Connect the Lock to the internet via Ethernet to the WAN port and plug devices into LAN ports.

Deploying into Mobile Networks

Mobile Network Connection

Disable SIM PIN, insert USB modem, connect to service port, configure APN, and connect devices.

Using the Tosibox Key

Key Software Installation

Insert the Tosibox Key into your computer's USB port to install the necessary Key software.

Understanding Key Status Indicators

Learn to interpret the visual cues indicating Lock-Key and Internet connectivity status for troubleshooting.