Need help?Do you have a question about the TOSINGRAF MAMO PLASTI 330 and is the answer not in the manual?
Details about the owner manual, its version, and printing date.
Explains the manual's role as an integral part of the machine and importance of reading warnings.
Instructions on how to handle and store the manual, ensuring it accompanies the machine.
Defines manufacturer's responsibilities and clarifies cases where responsibilities are relieved.
Explains definitions, typographic conventions, and used indications within the manual.
Provides contact information and details for the manufacturer, Tosingraf s.r.l.
Details on how to identify the machine using model and serial numbers, and associated data.
Specifies compliance with EU directives like Machinery Directive and Low Voltage Directive.
Details adherence to Harmonized Standards for risk assessment and safety devices.
Emphasizes the importance of reading and following manual instructions for operator safety.
Outlines the 12-month warranty period and procedures for requesting repairs.
Lists conditions and exclusions for the product guarantee, including misuse and tampering.
Describes criteria and measures adopted for safety compliance with relevant directives.
Warns against tampering with safety devices and details residual risks during operations.
Specifies the need for qualified personnel at different stages of the machine's life cycle.
Provides information on measured acoustic pressure levels during machine operation.
Lists key technical data such as film width, temperature, speed, voltage, and dimensions.
Identifies and labels the main components and parts of the laminator.
Covers transport conditions, verification of damages, and handling precautions.
Provides instructions for unpacking the machine and details storage features.
Details installation area requirements, electrical features, and testing procedures.
Stipulates that only qualified personnel with adequate training should operate the machine.
Describes the operator's position relative to the machine and its elements.
Explains the functions of the control panel, temperature, and speed adjustments.
Details the three positions for roller lifting and their usage.
Provides step-by-step instructions for loading film onto the laminator.
Covers general maintenance, cleaning procedures, and recommended practices for longevity.
Specific procedure for cleaning heating rollers, including precautions and steps.
Information on requesting assistance for maintenance not covered by routine procedures.
Lists common problems like machine not turning off, wrinkles, and film adhesion issues.
Details specific error codes (Err. #01 to #07) and their corresponding solutions.
Describes potential causes and solutions for motor-related errors.
To Next Page
General