Need help?Do you have a question about the Toslon XBOAT 730 and is the answer not in the manual?
Defines warranty duration and 'date of first purchase' for customers and distributors.
Outlines terms for product repair or replacement under warranty, including part ownership.
Details conditions for non-warranty repairs and their associated coverage.
Visual identification of the main bait boat unit.
Visual identification of the remote control unit.
Lists and identifies included accessories like cables, antennas, and chargers.
Shows optional Li-ion battery and charger components.
Identifies the included nylon bags for storage and transport.
Detailed labeling and identification of various parts and components of the bait boat.
Explains the innovative DSS (double seal system) for safe shaft sealing.
Describes the hopper system with sensor-less position control and its torque.
Details the Central Control Unit box and its control functions for boat operations.
Details the Electronic Speed Control box and its control functions for motors and switches.
Describes the front running and spot lights, including brightness control.
Details the tail light's composition and its twinkling conditions (hopper release, low battery).
Explains the power switch with its breathing LED indicator for On/Off operations.
Describes the automatic power-on/off feature when the boat is in or out of water.
Instructions for installing lead-acid and Li-ion batteries into the boat's supports.
Steps for connecting the installed batteries to the boat's power system.
Important safety warnings regarding battery voltage, pairing, and handling.
Details the use of the charge cable and charger for PB batteries, and notes for Li-ion.
Explains the low battery indication via the tail light twinkling below 10.3V.
Introduces the remote control and its functions, referring to a separate manual.
Lists and describes the functions of various switches, knobs, and sticks on the remote.
Important note on ensuring all switches are in the 'off' position before turning on the handset.
Explains how to use the right-hand joystick for forward, reverse, and turning maneuvers.
Describes using the left joystick to release bait from the hoppers, with tail light indicators.
Details how to close the bait hoppers using the left joystick.
Instructions for loading the hook into the hook holder, including steps for difficult insertions.
Explains how to release the hook using the left joystick and the pin mechanism.
Note on the maximum 5-second releasing time for the hook pin.
Instructions for turning the spot light on/off and adjusting its brightness using knob B.
Instructions for turning the daylight and tail lights on/off using switch A.
Explains how to use motor trim to correct the boat's direction for straight line running.
Details the radio system, channel count, and RC range.
Covers dimensions, weight, and special handle/weeds protection design.
Information on bait capacity, hopper release, and hook release system.
Includes engine details, battery support, lights, indicators, and failsafe system.
To Next Page
General