Using Your Humidifier
08
Cleaning and Maintenance
1. Use both hands to remove the water tank from the base of humidifier unit. If the
water tank contains water, you may need to place your second hand on the bottom
to support the water tank after removing from base.
2. Remove the mist outlet cover from the top of the water tank and fill with water.
3. After filling the water tank, place the water tank back onto the base of the humidifier.
4. Reinstall the mist outlet cover, taking care to align the notch of the mist outlet cover
within the groove on the water tank. The mist outlet can be rotated 360 to choose
the optimal mist direction for your needs.
5. Press the button on the front of the humidifier to select the proper mist volume.
6. If the light ring is white, your humidifier is good to go! If light ring is red, you need to
add more water to the water tank.
Note:
The optimal relative humidity level is anywhere within 40-60% RH. Relative
humidity levels above 60% RH may increase the chance of mold or mildew
growth. You may need to purchase a hygrometer to accurately measure the
relative humidity setting in your home.
Maintenance Checklists
Pre-Season Maintenance Checklist
Check the power cord for any cuts or exposed wiring
Empty and clean the water tank, dry after cleaning
Remove and clean the carbon air filter, dry after cleaning
To Next Page
Loading...
Need help?
General