27
Technical Information
Service Manual
Emergency operation
switch
Panel
Sketch map for
replacing batteries
Note:
If “H1” is displayed on the remote controller while it’s not operated by the professional person/after-sales person, it belongs to the misoperation.
Please operate it as below to cancel it.Under the OFF status of remote controller, hold the “MODE” button and “X-FAN” buttons
simultaneously
for 5s to cancel “H1” display.
● If remote controller displays “H1”, it belongs to the normal function reminder. If the unit is defrosting under heating mode, it operates according
to H1 defrosting mode. “H1” won’t be displayed on the panel of indoor unit
;
● Once you set H1 mode, if you turn off unit by remote controller, H1 will display 3 times on the remote controller and then di
sappear;
● Also, when you set H1 mode, when you change to heating mode, H1 will display 3 times on the remote controller and then disa
ppear.
To Next Page
Loading...
Need help?
General