Tosot TM18H5O User Manual

55
Installation and Maintenance
Service Manual
Steps Procedure
accumulator
valve support
Unsolder all spot welds connected with valve support
and then remove the valve support.
Note:When unsoldering the spot weld, wrap the gas
valve and liquid valve with wet cloth completely to
avoid damage to valve due to high temperature.
17. Remove valve support
18. Remove accumulator
gas-liquid
separator
19. Remove gas-liquid separator
Remove the screws connecting the gas-liquid
separator and remove the gas-liquid separator.
Remove the screws connecting the accumulator and
remove the accumulator.

Tosot TM18H5O Specifications

General

Brand	Tosot
Model	TM18H5O
Category	Heater
Language	English