To Next PageTo Next Page
Need help?Do you have a question about the Total Phase Aardvark I2C/SPI and is the answer not in the manual?
General| Brand | Total Phase |
|---|---|
| Model | Aardvark I2C/SPI |
| Category | Host Adapter |
| Language | English |
Details the PCA9554AD 8-bit I2C/SMBus I/O port device.
Details the AT24C02 2-Wire Bus Serial EEPROM device.
Details the AT25080A SPI Bus Serial EEPROM device.
Describes the J1 connector for the port expander IC and associated LEDs.
Explains jumpers for setting the I2C Port Expander's slave address.
Explains jumpers for setting the I2C EEPROM's slave address.
Describes the J4 jumper for connecting SPI EEPROM slave select lines.
Details the J5 connector for connecting bus monitors and logic analyzers.
Explains the function of I2C interface pins: SCL and SDA.
Explains the function of SPI interface pins: SS, SCK, MOSI, MISO.
Describes the pin-for-pin connected ports for Aardvark Host Adapters.
Details how to power the board via the Aardvark adapter and the POWER LED.
Covers cross-connecting adapters and daisy-chaining multiple activity boards.
Details I2C address configuration using jumpers with specific examples.
Provides links to example scripts for communicating with target ICs.
Points to detailed technical specifications for the board and host adapter.
Outlines copyright, license, and warranty disclaimers for the datasheet.
Provides website, support, and corporate contact details.
