3
b. Do not use the power tool if its ignition switch does not work. Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the tool to avoid
accidentally starting the tool.
d. Use the power tool, accessories and drill bits, etc. in accordance with
these instructions, taking into account the working conditions and the
work to be carried out. Using the power tool for operations other than
those intended could result in a dangerous situation.
e. Store power tools out of the reach of children and do not allow anyone
unfamiliar with the tool to use it.
f. Maintain power tools. Check for misalignment or binding of moving parts,
broken parts, and any other conditions that may affect the operation of
power tools. If damaged, have power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
g. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to jam and are easier to control.
5) Service
a. Have your power tool repaired by a qualified person and use replacement
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.
To Next Page
Loading...